The SmallRig Adjustable Articulating Magic Arm review is for camera operators who need to position a compact accessory at an angle that a fixed mount cannot provide.
The 9.8-inch 2066B uses two 360-degree ball heads and 1/4-inch screws at both ends, with a stated maximum weight recommendation of 213 g.
SmallRig Magic Arm Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible short rigging arm for camera users positioning a lightweight monitor, light, or microphone from a compatible 1/4-inch mount.
- 9.8-inch articulating arm, model 2066B.
- Double 360-degree ball-head design for adjusting the accessory angle.
- 1/4-inch threaded screw at each end for compatible camera-rig equipment.
- Intended for accessories including LCD and DV monitors, LED lights, on-camera flashes, and microphones.
Pros
- Provides two articulating points for positioning gear where a rigid connection would be limiting.
- Uses 1/4-inch connections at both ends, a useful format for compatible rig accessories.
Consider before buying
- The 213 g maximum weight recommendation limits it to lightweight accessories and makes load checking important.
- It needs compatible 1/4-inch mounting points at both ends; buyers should check their rig and accessory connections.
Read the full review summary
The 2066B is a simple positioning link for a compatible camera rig: attach one end to a cage, rail, handle, or other accessory with a 1/4-inch connection, then orient the other end for a monitor, light, or microphone.
Its double-ball-head design allows adjustment through a wide range of angles, while the rubber cushion at the screw helps protect the mounted monitor and improve its hold.
This arm is best suited to lightweight gear and setups where an articulated connection is useful.
Its 213 g maximum weight recommendation is the key constraint to plan around; users considering a heavier accessory should verify the total load and the compatibility of both mounting points before choosing it.
The buying factors
SmallRig Magic Arm Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle flexibility
Two 360-degree ball heads support broad positioning options for mounted accessories.
Mounting simplicity
The same 1/4-inch screw format on both ends suits compatible camera-rig accessories.
Accessory range
It is described for monitors, lights, microphones, flashes, and related rig components.
Load suitability
The stated maximum weight recommendation is 213 g, so the arm is aimed at a light setup.
Contact protection
A rubber O-ring cushion at the screw is intended to help protect the monitor and tighten its fit.
Rigging versatility
Its articulated link is useful where a fixed attachment point does not give the desired position.
Key Features and Specifications of SmallRig Magic Arm
- 9.8-inch articulating arm, model 2066B.
- Double 360-degree ball-head design for adjusting the accessory angle.
- 1/4-inch threaded screw at each end for compatible camera-rig equipment.
- Intended for accessories including LCD and DV monitors, LED lights, on-camera flashes, and microphones.
- Rubber O-ring cushion around the 1/4-inch screw to help prevent monitor scratches and provide a tighter fit.
- Stated maximum weight recommendation: 213 g.
Pros and Cons of SmallRig Magic Arm
Pros
- Provides two articulating points for positioning gear where a rigid connection would be limiting.
- Uses 1/4-inch connections at both ends, a useful format for compatible rig accessories.
- The rubber cushion offers a contact surface designed to help protect a monitor.
- At 9.8 inches, the arm gives some reach between a rig attachment and the accessory.
Consider before buying
- The 213 g maximum weight recommendation limits it to lightweight accessories and makes load checking important.
- It needs compatible 1/4-inch mounting points at both ends; buyers should check their rig and accessory connections.
- A longer articulated arm can take more space in a compact setup, so check the clearance available around the camera.
Who Should Buy SmallRig Magic Arm?
Good fit
Consider the 2066B if your rig has compatible 1/4-inch mounts and you want to angle a lightweight monitor, light, or microphone away from its attachment point.
Its two ball heads provide more positioning freedom than a straight fixed stud, and the rubber cushion is a helpful detail when mounting a monitor.
Before buying, compare the accessory's weight with the stated 213 g maximum recommendation and confirm that each end can connect to your setup as intended.
This is a focused extension arm for light accessories, so it makes the most sense when flexible placement is the main need.
Who should skip it
Choose another mounting approach if the accessory is heavier than the stated recommendation or if your setup requires a clamp rather than two 1/4-inch threaded connections.
It may be a poor fit when you need a very compact mounting link; check whether the 9.8-inch arm can be positioned without interfering with nearby camera controls or equipment.
How the SmallRig Magic Arm Fits a Camera Rig
Two pivot points for positioning
The double 360-degree ball-head arrangement gives the arm more than one point of articulation.
That can help place an accessory off to the side or at a viewing angle that a direct attachment does not offer, though the final position depends on the available space and the connected gear.
Thread compatibility is central
Both ends use 1/4-inch screws, making the arm straightforward to plan into a rig built around compatible threaded attachment points.
Check the mounting interface on the camera cage, rail, or handle as well as the accessory itself; the arm does not replace a clamp when the support surface has no matching threaded mount.
Keep the load modest
The stated maximum weight recommendation is 213 g, which frames the 2066B for light accessories.
Include the weight of any attached item when deciding whether it suits the setup, and allow for the arm's 9.8-inch reach when checking how the accessory will sit relative to the camera.
A small protective detail
The rubber O-ring cushion around the screw is designed to reduce scratching at a monitor connection and help the mount fit more tightly.
It is a useful interface detail, but buyers should still make sure the screw and accessory are properly matched and secured for their particular rig.
Alternatives to SmallRig Magic Arm
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 5.5-Inch Adjustable Articulating Magic Arm
Consider the shorter 5.5-inch arm if you want a more compact reach and its stated best weight load better suits your accessory; choose the 2066B when its longer 9.8-inch span is more useful and your load remains within its recommendation.
- This 5.5-inch arm also has two 360-degree ball heads and 1/4-inch screws at both ends, and its description gives a best weight load of 1.5 kg.
- The 2066B is a 9.8-inch arm with two 1/4-inch screws and a stated maximum weight recommendation of 213 g.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the clamp kit if you need to attach the arm to a rod, bar, or other compatible surface rather than relying on a threaded mount.
The 2066B is the more direct fit when your rig already provides 1/4-inch attachment points and you only need the articulating arm.
- The 2732 pairs a 9.8-inch articulating arm with a super clamp that has 1/4-inch and 3/8-inch threads; the clamp jaw is specified to open from 15 mm to 54 mm.
- The 2066B is an arm-only option with 1/4-inch screws at both ends, so it relies on compatible threaded mounting points in the rig.
Is SmallRig Magic Arm Worth It?
The SmallRig 2066B is worth considering when you need a 9.8-inch articulated link for lightweight camera accessories and already have compatible 1/4-inch mounts.
Its double-ball-head adjustment and rubber-cushioned screw make it a practical positioning component for a compact monitor, light, or microphone.
Keep the 213 g maximum weight recommendation in view and verify how the arm's length will fit your rig.
If your accessory exceeds that recommendation or you need to clamp onto a rod or surface, select a mounting design suited to that requirement.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible short rigging arm for camera users positioning a lightweight monitor, light, or microphone from a compatible 1/4-inch mount.
- 9.8-inch articulating arm, model 2066B.
- Double 360-degree ball-head design for adjusting the accessory angle.
- 1/4-inch threaded screw at each end for compatible camera-rig equipment.
- Intended for accessories including LCD and DV monitors, LED lights, on-camera flashes, and microphones.