The SmallRig Ballhead Clamp Double Ball Adapter review is for camera users who need a flexible way to position a monitor, light, or compact accessory around a rig.
Its combination of a clamp and a 1/4-inch screw can suit setups that need to attach to a narrow support as well as hold an accessory.
SmallRig Ballhead Clamp Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera users who want to attach a small monitor, light, or other accessory to a compatible rod, tube, or shoe mount.
- Double ball-head adapter with a bottom clamp and a 1/4-inch screw on top.
- Clamp jaws open to 40 mm, according to the product description.
- Articulation is described as 360 degrees, controlled by a single locking knob.
- Can mount directly to a DSLR or camcorder shoe mount, or clamp to compatible rods and tubes.
Pros
- Combines a support clamp and accessory screw in one small mounting piece.
- Double ball heads allow flexible positioning of attached gear.
Consider before buying
- A 40 mm jaw opening rules out supports that are wider or do not seat securely within the clamp.
- The supplied details list both 1 kg and 1.5 kg maximum figures; confirm the appropriate limit for the exact configuration before mounting gear.
Read the full review summary
This adapter pairs a double ball head with a bottom clamp, a top 1/4-inch screw, and a rubber-padded clamping area.
The clamp is described as opening to 40 mm, and the arm can be removed, giving it a compact role in a modular camera setup where accessories need to be placed at different angles.
It may suit DSLR or camcorder users, as well as creators mounting a small camera, monitor, light, microphone, or phone.
The most important fit checks are the diameter and shape of the support, the accessory's 1/4-inch connection, and the load limit: supplied details give different maximum figures, so buyers should confirm the applicable limit for their intended setup.
The buying factors
SmallRig Ballhead Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp can attach to compatible rods or tubes, while the 1/4-inch screw supports a range of small accessories.
Angle adjustment
A double ball-head design is intended to allow 360-degree articulation for positioning.
Support compatibility
The stated 40 mm jaw opening offers a useful range, provided the support fits securely within it.
Build and contact protection
The mostly aluminum-alloy construction and dense rubber pad are useful design choices for a compact clamp mount.
Load guidance
The product details give more than one maximum-load figure, so buyers should resolve the limit before mounting heavier gear.
Rig integration
Direct shoe-mount and rod or tube mounting are described, making it adaptable to several camera setups.
Key Features and Specifications of SmallRig Ballhead Clamp
- Double ball-head adapter with a bottom clamp and a 1/4-inch screw on top.
- Clamp jaws open to 40 mm, according to the product description.
- Articulation is described as 360 degrees, controlled by a single locking knob.
- Can mount directly to a DSLR or camcorder shoe mount, or clamp to compatible rods and tubes.
- Mostly aluminum-alloy construction with a dense rubber pad in the clamp area.
- The arm can be removed, and the listed folded size is 68.5 × 43 × 10 mm.
Pros and Cons of SmallRig Ballhead Clamp
Pros
- Combines a support clamp and accessory screw in one small mounting piece.
- Double ball heads allow flexible positioning of attached gear.
- Rubber padding is intended to help protect the clamped surface from scratches.
- Can be used with a range of compact camera and video accessories that have a compatible connection.
Consider before buying
- A 40 mm jaw opening rules out supports that are wider or do not seat securely within the clamp.
- The supplied details list both 1 kg and 1.5 kg maximum figures; confirm the appropriate limit for the exact configuration before mounting gear.
- The single locking knob means positioning and tightening are handled through a shared control.
Who Should Buy SmallRig Ballhead Clamp?
Good fit
Consider it if you want a compact way to position a small monitor, LED light, microphone, phone, or camera accessory on a compatible support.
The double ball-head arrangement gives more freedom to aim the accessory than a fixed bracket, while the 1/4-inch screw keeps the connection familiar for many camera accessories.
It is particularly relevant for rigs that can use either a shoe mount or a clamp-on attachment.
Before choosing it, measure the support where the clamp will sit, check that the accessory has a compatible 1/4-inch connection, and verify the load limit for your planned setup.
Who should skip it
Look elsewhere if your support is wider than the 40 mm opening, or if you need a mount with a different attachment interface.
For heavier accessories, do not rely on the conflicting maximum-load figures; confirm the applicable capacity before use.
How the SmallRig Ballhead Clamp Fits a Camera Rig
A clamp for more than one mounting point
The bottom clamp gives this adapter a way to attach to a rod or tube, while the description also names direct mounting to a DSLR or camcorder shoe.
That flexibility can help when a rig has no convenient accessory position, but compatibility depends on the actual support diameter and connection.
Ball heads help with framing
The double ball-head layout is designed for 360-degree articulation, making it possible to point a monitor or light in a chosen direction.
A shared locking knob keeps the control simple; buyers should plan to make adjustments with the attached device supported while tightening.
Check the load before mounting
The product details give a maximum load of up to 1 kg in one place and up to 1.5 kg elsewhere.
Because those figures differ, treat the limit as something to confirm for the intended configuration, especially with a heavier monitor or light.
A small, padded metal construction
The mostly aluminum-alloy body and dense rubber pad keep the design focused on a compact, clamp-on role.
The padding is intended to reduce scratching where the clamp contacts a surface, though a buyer should still check that the support is properly seated before loading the arm.
Alternatives to SmallRig Ballhead Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount 1138
Consider the 1138 if an included action-camera adapter and a broader range of named clamping surfaces better match your setup. The reviewed adapter may be a fit when its shoe-mount option and compact detachable arm are more useful.
- This clamp mount includes an action-camera adapter and is described with a maximum support of up to 1.5 kg; it can clamp to a rod, tube, table, frame, or tripod.
- The reviewed adapter has a 40 mm opening and a top 1/4-inch screw, with supplied load figures that differ.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit 2732
Choose the 2732 if you need a longer reach and more threaded mounting points. The reviewed adapter is more suitable when a compact double-ball clamp arrangement is enough.
- This kit combines a super clamp with a 9.8-inch articulating arm, with 1/4-inch and 3/8-inch threaded holes on the clamp and 1/4-inch screws at both ends of the arm.
- The reviewed adapter combines a bottom clamp with a double ball head and a 1/4-inch screw, in a compact form.
Is SmallRig Ballhead Clamp Worth It?
The SmallRig Ballhead Clamp Double Ball Adapter 2164-CF is worth considering for a compact camera rig that needs a clamp-on accessory point and flexible angle adjustment.
Its padded clamp, ball-head articulation, and 1/4-inch screw make it adaptable for small gear.
Check the support diameter and connection before buying, and resolve which load limit applies to your setup.
If those fit your use, this adapter offers a versatile mounting approach; if you need more reach or broader mounting options, compare the alternatives above.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera users who want to attach a small monitor, light, or other accessory to a compatible rod, tube, or shoe mount.
- Double ball-head adapter with a bottom clamp and a 1/4-inch screw on top.
- Clamp jaws open to 40 mm, according to the product description.
- Articulation is described as 360 degrees, controlled by a single locking knob.
- Can mount directly to a DSLR or camcorder shoe mount, or clamp to compatible rods and tubes.