The SmallRig Field Monitor Mount Holder is a compact way to position a 5- or 7-inch monitor on a camera cage or handle.
This SmallRig Field Monitor Mount Holder review looks at its adjustable tilt and swivel, mounting options, and the setup details buyers should check.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact camera cage mount for filmmakers who want adjustable monitor positioning and a cold shoe connection.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- The top has locating pins and a silicone pad intended to help secure compatible monitors and protect against scratching or twisting.
Pros
- Combines tilt and swivel adjustment in a compact mount.
- Hand-adjustable tilt tension makes angle changes convenient.
Consider before buying
- The listed load limit varies with tilt angle, so buyers need to check their monitor’s weight against the intended position.
- Swivel tension adjustment and the recommended screw retightening require the included Allen wrench.
Read the full review summary
This mount combines a cold shoe base, a top 1/4-inch screw, and an additional 1/4-inch threaded hole underneath.
That gives it a straightforward role in a compact rig: attach it to a compatible shoe, secure a monitor on top, and adjust the screen’s viewing angle without adding a longer articulated arm.
Its appeal is strongest for camera operators who use a 5- or 7-inch monitor and value a small, direct mounting point. Tilt tension is adjusted by hand, while swivel tension uses the included Allen wrench.
The stated load capacity changes with tilt angle, so buyers should match their monitor and chosen position to the relevant limit and tighten the knurled screw as directed.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
Offers 180-degree tilt and 360-degree swivel, with tilt tension adjusted by thumbscrew.
Mounting flexibility
Combines a cold shoe base, a lower 1/4-inch threaded hole, and a top 1/4-inch screw.
Monitor fit
Designed for 5- and 7-inch camera monitors, with locating pins and a silicone pad.
Rig compactness
The folded dimensions are 78 by 67 by 42 mm, and the listed weight is 76 g.
Load guidance
Provides different maximum load figures for three tilt positions, so setup angle matters.
Setup convenience
The tilt uses a hand-adjusted thumbscrew, while swivel tension and additional security involve an Allen wrench.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- The top has locating pins and a silicone pad intended to help secure compatible monitors and protect against scratching or twisting.
- A cold shoe adapter at the base connects to a compatible camera cage or handle; a lower 1/4-inch-20 threaded hole can connect to a magic arm or stabilizer.
- The top 1/4-inch-20 screw can support a monitor, microphone, or light.
- The stated load capacity varies by tilt: below 9.3 lb at 90 degrees, below 5.5 lb at 45 degrees, and below 5 lb at 30 degrees. The knurled screw should be retightened with the Allen wrench for added security.
Pros and Cons of SmallRig Monitor Mount
Pros
- Combines tilt and swivel adjustment in a compact mount.
- Hand-adjustable tilt tension makes angle changes convenient.
- Locating pins and a silicone pad add useful contact features for compatible monitors.
- Multiple connection points offer more than one way to integrate the mount into a rig.
Consider before buying
- The listed load limit varies with tilt angle, so buyers need to check their monitor’s weight against the intended position.
- Swivel tension adjustment and the recommended screw retightening require the included Allen wrench.
- The cold shoe base requires a compatible shoe mount; setups using another attachment point may need a separate support.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider it if your rig has a compatible cold shoe and you want to mount a 5- or 7-inch monitor close to the camera.
Its tilt and swivel range can help orient the screen for a preferred viewing position, and the compact size should suit rigs where a longer arm would add unnecessary reach.
It may also suit a setup that needs a simple accessory mounting point: the upper screw is described for a monitor, microphone, or light, and the bottom threaded hole can connect to a magic arm or stabilizer.
Before choosing it, compare the weight of the attached device with the capacity specified for your planned tilt angle.
Factor the adjustment routine into your workflow. Tilt tension can be changed by hand, but swivel tension uses an Allen wrench, and the instructions call for retightening the knurled screw with that wrench.
If you regularly reposition the rig between takes, keep the wrench accessible.
Who should skip it
Skip it if your monitor and chosen tilt position exceed the corresponding stated load limit, or if your rig lacks a compatible cold shoe and you do not plan to use the threaded connection with a suitable support.
Choose a different mounting approach if you need an extended arm to place the monitor well away from the camera; this holder is a compact direct mount, and no extension length is specified.
How the SmallRig Monitor Mount Fits a Camera Rig
A direct mount for common field monitors
The mount is designed around 5- and 7-inch camera monitors. The locating pins and silicone pad provide contact features intended to help hold a compatible monitor in place and protect its surface.
Buyers should still check that their monitor’s mounting interface aligns with the top screw and pins.
Angle range with two tension controls
A 180-degree tilt range and 360-degree swivel allow substantial repositioning. Tilt tension is adjusted with a thumbscrew, while swivel tension uses an Allen wrench, so the two motions have different adjustment methods.
That distinction matters if frequent, tool-free repositioning is a priority.
Capacity depends on the chosen tilt
The specified maximum changes by position: below 9.3 lb at 90 degrees, below 5.5 lb at 45 degrees, and below 5 lb at 30 degrees.
Treat the figure for the intended tilt as the relevant ceiling, and include the attached device’s weight when checking the setup.
Several ways to attach it
The base slides into a cold shoe, while its 1/4-inch-20 threaded hole is intended for a magic arm or stabilizer. The top screw can also hold a monitor, microphone, or light.
This gives the holder options within a compatible rig, though each connection still needs to match the hardware being used.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Camera Monitor Mount 6313
Consider the Field Monitor Mount Holder when angle-specific load guidance is useful for your setup.
The 6313 may suit buyers who want the explicitly described horizontal and vertical mounting orientation; compare the mounting interface and required fit before choosing.
- The 6313 also offers 180-degree tilt and 360-degree pan, and its description specifies horizontal and vertical monitor installation.
- It has a retractable locating screw, locating pins, a silicone pad, and a cold shoe base; the provided details do not specify its load limit.
- The Field Monitor Mount Holder offers 180-degree tilt, 360-degree swivel, and stated load limits that vary by tilt angle.
Camera Mounts & Clamps alternative

900+ ratings
Read Amazon ReviewsSmallRig Articulating Rosette Arm 1498
Choose the Field Monitor Mount Holder for a compact direct connection and its stated angle-specific limits. The 1498 is the more relevant option when an 11-inch reach is useful and its shoe-to-thread arrangement suits the rig.
- The 1498 is an 11-inch articulating arm with a shoe base at one end and a 1/4-inch thread at the other.
- Its description gives a maximum load capacity of 2.8 kg and a best weight load range of 1.5 to 2 kg.
- The Field Monitor Mount Holder is a compact direct mount with cold shoe and 1/4-inch-20 connection options.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs adjustable monitor placement, a cold shoe connection, and an extra threaded attachment point.
Its broad tilt and swivel range, small form, and monitor contact features make it a focused mounting option.
Check the load limit for your intended tilt angle and confirm that the cold shoe or threaded connection fits your setup.
The different adjustment methods also matter: tilt tension is hand-adjustable, while swivel tension and the recommended screw retightening use an Allen wrench.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact camera cage mount for filmmakers who want adjustable monitor positioning and a cold shoe connection.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- The top has locating pins and a silicone pad intended to help secure compatible monitors and protect against scratching or twisting.